;ELC
;;; Compiled by mockbuild@buildfarm06-new.corp.cloudlinux.com on Fri Oct 11 10:11:49 2024
;;; from file /builddir/build/BUILD/emacs-24.3/lisp/textmodes/reftex-vars.el
;;; in Emacs version 24.3.1
;;; with all optimizations.

;;; This file uses dynamic docstrings, first added in Emacs 19.29.

;;; This file does not contain utf-8 non-ASCII characters,
;;; and so can be loaded in Emacs versions earlier than 23.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


(defalias 'reftex-set-dirty #[(symbol value) "\303	\nL\207" [reftex-tables-dirty symbol value t] 2])
#@180 The default label environment descriptions.
Lower-case symbols correspond to a style file of the same name in the LaTeX
distribution.  Mixed-case symbols are convenience aliases.
(defconst reftex-label-alist-builtin '((Sideways "Alias for -->rotating" (rotating)) (AMSTeX "amsmath with eqref macro" ((nil 101 nil "~\\eqref{%s}") amsmath)) (amsmath "AMS-LaTeX math environments" (("align" 101 nil nil eqnarray-like) ("gather" 101 nil nil eqnarray-like) ("multline" 101 nil nil t) ("flalign" 101 nil nil eqnarray-like) ("alignat" 101 nil nil alignat-like) ("xalignat" 101 nil nil alignat-like) ("xxalignat" 101 nil nil alignat-like) ("subequations" 101 nil nil t))) (endnotes "The \\endnote macro" (("\\endnote[]{}" 78 "en:" "~\\ref{%s}" 2 (regexp "endnotes?" "notes?" "Anmerkung\\(en\\)?" "Anm\\.")))) (fancybox "The Beqnarray environment" (("Beqnarray" 101 nil nil eqnarray-like))) (floatfig "The floatingfigure environment" (("floatingfigure" 102 nil nil caption))) (longtable "The longtable environment" (("longtable" 116 nil nil caption))) (picinpar "The figwindow and tabwindow environments" (("figwindow" 102 nil nil 1) ("tabwindow" 102 nil nil 1))) (rotating "Sidewaysfigure and table" (("sidewaysfigure" 102 nil nil caption) ("sidewaystable" 116 nil nil caption))) (sidecap "CSfigure and SCtable" (("SCfigure" 102 nil nil caption) ("SCtable" 116 nil nil caption))) (subfigure "Subfigure environments/macro" (("subfigure" 102 nil nil caption) ("subfigure*" 102 nil nil caption) ("\\subfigure[]{}" 102 nil nil 1))) (supertab "Supertabular environment" (("supertabular" 116 nil nil "\\tablecaption{"))) (wrapfig "The wrapfigure environment" (("wrapfigure" 102 nil nil caption))) (ctable "The ctable package" (("\\ctable[]{}{}{}" 116 "tab:" "\\ref{%s}" 1 ("table" "Tabelle")))) (listings "The listings package" (("lstlisting" 108 "lst:" "~\\ref{%s}" nil (regexp "[Ll]isting")))) (minted "The minted package" (("minted" 108 "lst:" "~\\ref{%s}" nil (regexp "[Ll]isting")))) (LaTeX "LaTeX default environments" (("section" 115 "%S" "~\\ref{%s}" (nil . t) (regexp "parts?" "chapters?" "chap\\." "sections?" "sect?\\." "paragraphs?" "par\\." "\\\\S" "\247" "Teile?" "Kapitel" "Kap\\." "Abschnitte?" "appendi\\(x\\|ces\\)" "App\\." "Anh\"?ange?" "Anh\\.")) ("enumerate" 105 "item:" "~\\ref{%s}" item (regexp "items?" "Punkte?")) ("equation" 101 "eq:" "~(\\ref{%s})" t (regexp "equations?" "eqs?\\." "eqn\\." "Gleichung\\(en\\)?" "Gl\\.")) ("eqnarray" 101 "eq:" nil eqnarray-like) ("figure" 102 "fig:" "~\\ref{%s}" caption (regexp "figure?[sn]?" "figs?\\." "Abbildung\\(en\\)?" "Abb\\.")) ("figure*" 102 nil nil caption) ("table" 116 "tab:" "~\\ref{%s}" caption (regexp "tables?" "tab\\." "Tabellen?")) ("table*" 116 nil nil caption) ("\\footnote[]{}" 110 "fn:" "~\\ref{%s}" 2 (regexp "footnotes?" "Fussnoten?")) ("any" 32 " " "~\\ref{%s}" nil)))) (#$ . 667))
#@272 Builtin versions of the citation format.
The following conventions are valid for all alist entries:
`?
' should always point to a straight \cite{%l} macro.
`?t'    should point to a textual citation (citation as a noun).
`?p'    should point to a parenthetical citation.
(defconst reftex-cite-format-builtin '((default "Default macro \\cite{%l}" "\\cite[]{%l}") (natbib "The Natbib package" ((13 . "\\cite[][]{%l}") (116 . "\\citet[][]{%l}") (84 . "\\citet*[][]{%l}") (112 . "\\citep[][]{%l}") (80 . "\\citep*[][]{%l}") (101 . "\\citep[e.g.][]{%l}") (115 . "\\citep[see][]{%l}") (97 . "\\citeauthor{%l}") (65 . "\\citeauthor*{%l}") (121 . "\\citeyear{%l}") (110 . "\\nocite{%l}"))) (amsrefs "The AMSRefs package" ((13 . "\\cite{%l}") (112 . "\\cite{%l}") (80 . "\\cites{%l}") (116 . "\\ocite{%l}") (84 . "\\ocites{%l}") (121 . "\\ycite{%l}") (89 . "\\ycites{%l}") (97 . "\\citeauthor{%l}") (65 . "\\citeauthory{%l}") (102 . "\\fullcite{%l}") (70 . "\\fullocite{%l}") (110 . "\\nocite{%l}"))) (jurabib "The Jurabib package" ((13 . "\\cite{%l}") (99 . "\\cite[][]{%l}") (116 . "\\citet{%l}") (112 . "\\citep{%l}") (101 . "\\citep[e.g.][]{%l}") (115 . "\\citep[see][]{%l}") (117 . "\\fullcite{%l}") (105 . "\\citetitle{%l}") (97 . "\\citeauthor{%l}") (101 . "\\citefield{}{%l}") (121 . "\\citeyear{%l}") (102 . "\\footcite{%l}") (70 . "\\footcite[][]{%l}") (108 . "\\footfullcite{%l}"))) (bibentry "The Bibentry package" "\\bibentry{%l}") (harvard "The Harvard package" ((13 . "\\cite[]{%l}") (112 . "\\cite[]{%l}") (116 . "\\citeasnoun{%l}") (110 . "\\citeasnoun{%l}") (115 . "\\possessivecite{%l}") (101 . "\\citeaffixed{%l}{?}") (121 . "\\citeyear{%l}") (97 . "\\citename{%l}"))) (chicago "The Chicago package" ((13 . "\\cite[]{%l}") (116 . "\\citeN[]{%l}") (84 . "\\shortciteN{%l}") (112 . "\\cite[]{%l}") (80 . "\\shortcite{%l}") (97 . "\\citeA{%l}") (65 . "\\shortciteA{%l}") (121 . "\\citeyear{%l}"))) (astron "The Astron package" ((13 . "\\cite[]{%l}") (112 . "\\cite[]{%l}") (116 . "%2a (\\cite{%l})"))) (author-year "Do-it-yourself Author-year" ((13 . "\\cite{%l}") (116 . "%2a (%y)\\nocite{%l}") (112 . "(%2a %y\\nocite{%l})"))) (locally "Full info in parenthesis" "(%2a %y, %j %v, %P, %e: %b, %u, %s %<)") (context "ConTeXt bib module" ((13 . "\\cite[%l]") (115 . "\\cite[][%l]") (110 . "\\nocite[%l]")))) (#$ . 3530))
#@177 Builtin stuff for `reftex-index-macros'.
Lower-case symbols correspond to a style file of the same name in the LaTeX
distribution.  Mixed-case symbols are convenience aliases.
(defconst reftex-index-macros-builtin '((default "Default \\index and \\glossary macros" (("\\index{*}" "idx" 105 #1="" nil t) ("\\glossary{*}" "glo" 103 #1# nil t))) (multind "The multind.sty package" (("\\index{}{*}" 1 105 #1# nil t))) (index "The index.sty package" (("\\index[]{*}" 1 105 #1# nil t) ("\\index*[]{*}" 1 73 #1# nil nil))) (Index-Shortcut "index.sty with \\shortindexingon" (("\\index[]{*}" 1 105 #1# nil t) ("\\index*[]{*}" 1 73 #1# nil nil) ("^[]{*}" 1 94 #1# texmathp t) ("_[]{*}" 1 95 #1# texmathp nil)))) (#$ . 5865))
(byte-code "\300\301\302\303\304\305\306\307\306\310\306\311\312\313\314\315&\210\300\316\302\317\314\301%\210\320\321\322\323\314\316\324\325&\210\320\326\327\330\314\316\324\331&\210\320\332\333\334\314\316\335\336\324\337&	\210\320\340\341\342\314\316\324\331&\210\320\343\302\344\314\316\324\345&\210\320\346\347\350\314\316\324\351&\210\320\352\302\353\314\316\324\345&\210\320\354\355\356\314\316\324\357&\207" [custom-declare-group reftex nil "LaTeX label and citation support." :tag "RefTeX" :link (url-link :tag "Home Page" "http://www.gnu.org/software/auctex/reftex.html") (emacs-commentary-link :tag "Commentary in reftex.el" "reftex.el") (custom-manual "(reftex)Top") :prefix "reftex-" :group tex reftex-table-of-contents-browser "A multifile table of contents browser." custom-declare-variable reftex-include-file-commands '("include" "input") "LaTeX commands which input another file.\nThe file name is expected after the command, either in braces or separated\nby whitespace." :type (repeat string) reftex-max-section-depth 12 "Maximum depth of section levels in document structure.\nThe default in standard LaTeX is 7, but there are packages for\nwhich this needs to be larger." integer reftex-section-levels '(("part" . 0) ("chapter" . 1) ("section" . 2) ("subsection" . 3) ("subsubsection" . 4) ("paragraph" . 5) ("subparagraph" . 6) ("addchap" . -1) ("addsec" . -2)) "Commands and levels used for defining sections in the document.\nThis is an alist with each element like (COMMAND-NAME . LEVEL).\nThe car of each cons cell is the name of the section macro (without\nthe backslash).  The cdr is a number indicating its level.  A negative\nlevel means the same level as the positive value, but the section will\nnever get a number.  The cdr may also be a function which will be called\nto after the section-re matched to determine the level.\nThis list is also used for promotion and demotion of sectioning commands.\nIf you are using a document class which has several sets of sectioning\ncommands, promotion only works correctly if this list is sorted first\nby set, then within each set by level.  The promotion commands always\nselect the nearest entry with the correct new level." :set reftex-set-dirty (repeat (cons (string :tag "sectioning macro" "") (choice (number :tag "level           " 0) (symbol :tag "function        " my-level-func)))) reftex-toc-max-level 100 "The maximum level of toc entries which will be included in the TOC.\nSection headings with a bigger level will be ignored.  In RefTeX, chapters\nare level 1, sections are level 2 etc.\nThis variable can be changed from within the *toc* buffer with the `t' key." reftex-part-resets-chapter "Non-nil means, \\part is like any other sectioning command.\nThis means, part numbers will be included in the numbering of chapters, and\nchapter counters will be reset for each part.\nWhen nil (the default), parts are special, do not reset the chapter counter\nand also do not show up in chapter numbers." boolean reftex-auto-recenter-toc 'frame "Non-nil means, turn automatic recentering of *TOC* window on.\nWhen active, the *TOC* window will always show the section you\nare currently working in.  Recentering happens whenever Emacs is idle for\nmore than `reftex-idle-time' seconds.\n\nValue t means, turn on immediately when RefTeX gets started.  Then,\nrecentering will work for any TOC window created during the session.\n\nValue 'frame (the default) means, turn automatic recentering on only while the\ndedicated TOC frame does exist, and do the recentering only in that frame.  So\nwhen creating that frame (with `d' key in an ordinary TOC window), the\nautomatic recentering is turned on.  When the frame gets destroyed, automatic\nrecentering is turned off again.\n\nThis feature can be turned on and off from the menu\n(Ref->Options)." (choice (const :tag "never" nil) (const :tag "always" t) (const :tag "in dedicated frame only" frame)) reftex-toc-split-windows-horizontally "Non-nil means, create TOC window by splitting window horizontally." reftex-toc-split-windows-fraction 0.3 "Fraction of the width or height of the frame to be used for TOC window.\nSee also `reftex-toc-split-windows-horizontally'." number] 16)
#@77 This variable is obsolete, use `reftex-toc-split-windows-fraction' instead.
(defvar reftex-toc-split-windows-horizontally-fraction 0.5 (#$ . 10814))
(byte-code "\301\302\303\304\305\306\307\310&\210\301\311\312\313\305\306\307\310&\210\301\314\312\315\305\306\307\310&\210\301\316\312\317\305\306\307\310&\210\301\320\321\322\305\306\307\323&\210\301\324\312\325\305\306\307\310&\210\301\326\312\327\305\306\307\310&\210\301\330\312\331\305\306\305\332\307\310&	\210\301\333\312\334\305\306\307\335&\210\336\337\312\340\305\341%\210\336\342\312\343\305\337%\210\301\344\345\346\305\342\347\350\307\351\352\353\354\303\355\303\356\357\"BBBBBBB&	\210\301\360\312\361\305\342\347\350\307\362\363\364\365\366\367\370\363\364\371\366\372\356\373\"BBBBB\257D&	\210\301\374\375\376\305\342\307\377&\210\301\201@\201A\201B\305\342\307\201C&\210\301\201D\312\201E\305\342\307\201F&\210\301\201G\312\201H\305\342\307\335&\210\336\201I\312\201J\305\337%\210\301\201K\201L\201M\305\201I\307\201N&\210\301\201O\201P\201Q\305\201I\307\201R&\210\301\201S\201T\201U\305\201I\307\201R&\210\301\201V\201W\201X\305\201I\307\201Y&\210\301\201Z\201[\201\\\305\201I\307\201]&\210\301\201^\201_\201`\305\201I\307\201a&\210\301\201b\312\201c\305\201I\307\201d&\210\336\332\312\201e\305\337%\207" [reftex-label-alist-builtin custom-declare-variable reftex-toc-keep-other-windows t "Non-nil means, split the selected window to display the *toc* buffer.\nThis helps to keep the window configuration, but makes the *toc* small.\nWhen nil, all other windows except the selected one will be deleted, so\nthat the *toc* window fills half the frame." :group reftex-table-of-contents-browser :type boolean reftex-toc-include-file-boundaries nil "Non-nil means, include file boundaries in *toc* buffer.\nThis flag can be toggled from within the *toc* buffer with the `F' key." reftex-toc-include-labels "Non-nil means, include labels in *toc* buffer.\nThis flag can be toggled from within the *toc* buffer with the `l' key." reftex-toc-include-index-entries "Non-nil means, include index entries in *toc* buffer.\nThis flag can be toggled from within the *toc* buffer with the `i' key." reftex-toc-confirm-promotion 2 "Non-nil means, promotion/demotion commands first prompt for confirmation.\nIf nil, the command is executed immediately.  If this is an integer N,\nask for confirmation only if N or more section commands are going to be\nchanged." (choice (const :tag "Never" nil) (const :tag "Always" t) (number :tag "When more than N sections" :value 2)) reftex-toc-include-context "Non-nil means, include context with labels in the *toc* buffer.\nContext will only be shown when labels are visible as well.\nThis flag can be toggled from within the *toc* buffer with the `c' key." reftex-toc-follow-mode "Non-nil means, point in *toc* buffer will cause other window to follow.\nThe other window will show the corresponding part of the document.\nThis flag can be toggled from within the *toc* buffer with the `f' key." reftex-revisit-to-follow "Non-nil means, follow-mode will revisit files if necessary.\nIf nil, follow-mode will be suspended for stuff in unvisited files." reftex-referencing-labels reftex-toc-mode-hook "Mode hook for `reftex-toc-mode'." hook custom-declare-group reftex-label-support "Support for creation, insertion and referencing of labels in LaTeX." reftex reftex-defining-label-environments "Definition of environments and macros to do with label." reftex-default-label-alist-entries '(amsmath endnotes fancybox floatfig longtable picinpar rotating sidecap subfigure supertab wrapfig listings minted ctable LaTeX) "Default label alist specifications.  LaTeX should always be the last entry.\nThe value of this variable is a list of symbols with associations in the\nconstant `reftex-label-alist-builtin'.  Check that constant for a full list\nof options." :set reftex-set-dirty set :indent 4 :inline :greedy mapcar #[(x) "\301\302\303@!\304A@Q@F\207" [x const :tag symbol-name ": "] 5] reftex-label-alist "Alist with information on environments for \\label-\\ref use.\n\nThis doc string is easier to understand after reading the configuration\nexamples in the manual.  Looking at the builtin defaults in the constant\n`reftex-label-alist-builtin' may also be instructive.\n\nSet this variable to define additions and changes to the default.  The only\nthings you MUST NOT change is that `?s' is the type indicator for section\nlabels, and SPC for the `any' label type.  These are hard-coded at other\nplaces in the code.\n\nThe value of the variable must be a list of items.  Each item is a list\nitself and has the following structure:\n\n (ENV-OR-MACRO TYPE-KEY LABEL-PREFIX REFERENCE-FORMAT CONTEXT-METHOD\n           (MAGIC-WORD ... ) TOC-LEVEL)\n\nEach list entry describes either an environment carrying a counter for use\nwith \\label and \\ref, or a LaTeX macro defining a label as (or inside)\none of its arguments.  The elements of each list entry are:\n\nENV-OR-MACRO\n    Name of the environment (like \"table\") or macro (like \"\\\\myfig\").\n    For macros, indicate the macro arguments for best results, as in\n    \"\\\\myfig[]{}{}{*}{}\".  Use square brackets for optional arguments,\n    a star to mark the label argument, if any.  The macro does not have to\n    have a label argument - you could also use \\label{..} inside one of\n    its arguments.\n    Special names: `section' for section labels, `any' to define a group\n    which contains all labels.\n\n    This may also be a function to do local parsing and identify point to\n    be in a non-standard label environment.  The function must take an\n    argument BOUND and limit backward searches to this value.  It should\n    return either nil or the position where the special environment starts.\n    See the Info documentation for an example.\n\n    Finally this may also be nil if the entry is only meant to change\n    some settings associated with the type indicator character (see below).\n\nTYPE-KEY\n    Type indicator character, like `?t', must be a printable ASCII character.\n    The type indicator is a single character which defines a label type.\n    Any label inside the environment or macro is assumed to belong to this\n    type.  The same character may occur several times in this list, to cover\n    cases in which different environments carry the same label type (like\n    `equation' and `eqnarray').\n    If the type indicator is nil and the macro has a label argument {*},\n    the macro defines neutral labels just like \\label.  In this case\n    the remainder of this entry is ignored.\n\nLABEL-PREFIX\n    Label prefix string, like \"tab:\".\n    The prefix is a short string used as the start of a label.  It may be the\n    empty string.  The prefix may contain the following `%' escapes:\n       %f   Current file name with directory and extension stripped.\n       %F   Current file name relative to directory of master file.\n       %m   Master file name, directory and extension stripped.\n       %M   Directory name (without path) where master file is located.\n       %u   User login name, on systems which support this.\n       %S   A section prefix derived with variable `reftex-section-prefixes'.\n\n    Example: In a file `intro.tex', \"eq:%f:\" will become \"eq:intro:\").\n\nREFERENCE-FORMAT\n    Format string for reference insertion in buffer.  `%s' will be replaced\n    by the label.\n    When the format starts with `~', the `~' will only be inserted if\n    there is not already a whitespace before point.\n\nCONTEXT-METHOD\n    Indication on how to find the short context.\n    - If nil, use the text following the \\label{...} macro.\n    - If t, use\n       - the section heading for section labels.\n       - text following the \\begin{...} statement of environments.\n         (not a good choice for environments like eqnarray or enumerate,\n         where one has several labels in a single environment).\n       - text after the macro name (starting with the first arg) for macros.\n    - If an integer, use the nth argument of the macro.  As a special case,\n      1000 means to get text after the last macro argument.\n    - If a string, use as regexp to search *backward* from the label.  Context\n      is then the text following the end of the match.  E.g. setting this to\n      \"\\\\\\\\caption[[{]\" will use the caption in a figure or table\n      environment.\n      \"\\\\\\\\begin{eqnarray}\\\\|\\\\\\\\\\\\\\\\\" works for eqnarrays.\n    - If any of `caption', `item', `eqnarray-like', `alignat-like', this\n      symbol will internally be translated into an appropriate regexp\n      (see also the variable `reftex-default-context-regexps').\n    - If a function, call this function with the name of the environment/macro\n      as argument.  On call, point will be just after the \\label macro.  The\n      function is expected to return a suitable context string.  It should\n      throw an exception (error) when failing to find context.\n      As an example, here is a function returning the 10 chars following\n      the label macro as context:\n\n        (defun my-context-function (env-or-mac)\n          (if (> (point-max) (+ 10 (point)))\n              (buffer-substring (point) (+ 10 (point)))\n            (error \"Buffer too small\")))\n\n    Label context is used in two ways by RefTeX: For display in the label\n    menu, and to derive a label string.  If you want to use a different\n    method for each of these, specify them as a dotted pair.\n    E.g. `(nil . t)' uses the text after the label (nil) for display, and\n    text from the default position (t) to derive a label string.  This is\n    actually used for section labels.\n\nMAGIC-WORDS\n    List of magic words which identify a reference to be of this type.\n    If the word before point is equal to one of these words when calling\n    `reftex-reference', the label list offered will be automatically\n    restricted to labels of the correct type.\n    If the first element of this wordlist is the symbol `regexp', the\n    strings are interpreted as regular expressions.  RefTeX will add\n    a \"\\\\W\" to the beginning and other stuff to the end of the regexp.\n\nTOC-LEVEL\n    The integer level at which this environment should be added to the\n    table of contents.  See also `reftex-section-levels'.  A positive\n    value will number the entries mixed with the sectioning commands of\n    the same level.  A negative value will make unnumbered entries.\n    Useful only for theorem-like environments, will be ignored for macros.\n    When omitted or nil, no TOC entries will be made.\n\nIf the type indicator characters of two or more entries are the same, RefTeX\nwill use\n - the first non-nil format and prefix\n - the magic words of all involved entries.\n\nAny list entry may also be a symbol.  If that has an association in\n`reftex-label-alist-builtin', the cddr of that association is spliced into the\nlist.  However, builtin defaults should normally be set with the variable\n`reftex-default-label-alist-entries'." repeat choice :tag "Package or Detailed   " :value (#1="" 97 nil nil nil nil) (list :tag "Detailed Entry" :value (#1# 97 nil nil nil nil) (choice :tag "Environment or \\macro " (const :tag "Ignore, just use typekey" nil) (string #1#) (symbol :tag "Special parser" my-parser)) (choice :tag "Type specification    " (const :tag "unspecified, like in \\label" nil) (character :tag "Char  " 97)) (choice :tag "Label prefix string   " (const :tag "Default" nil) (string :tag "String" "lab:")) (choice :tag "Label reference format" (const :tag "Default" nil) (string :tag "String" "~\\ref{%s}")) (choice :tag "Context method        " (const :tag "Default position" t) (const :tag "After label" nil) (number :tag "Macro arg nr" 1) (regexp :tag "Regexp" #1#) (const :tag "Caption in float" caption) (const :tag "Item in list" item) (const :tag "Eqnarray-like" eqnarray-like) (const :tag "Alignat-like" alignat-like) (symbol :tag "Function" my-func)) (repeat :tag "Magic words" :extra-offset 2 (string)) (option (choice :tag "Make TOC entry     " (const :tag "No entry" nil) (integer :tag "Level" :value -3)))) "Package" AMSTeX #[(x) "\301\302\303@!\260
@F\207" [x const :tag symbol-name] 4] reftex-section-prefixes '((0 . "part:") (1 . "cha:") (t . "sec:")) "Prefixes for section labels.\nWhen the label prefix given in an entry in `reftex-label-alist' contains `%S',\nthis list is used to determine the correct prefix string depending on the\ncurrent section level.\nThe list is an alist, with each entry of the form (KEY . PREFIX)\nPossible keys are sectioning macro names like `chapter', section levels\n(as given in `reftex-section-levels'), and t for the default." (repeat (cons :value (0 . #1#) (choice (string :tag "macro name") (integer :tag "section level") (const :tag "default" t)) (string :tag "Prefix"))) reftex-default-context-regexps '((caption . "\\\\\\(rot\\)?caption\\*?[[{]") (item . "\\\\item\\(\\[[^]]*\\]\\)?") (eqnarray-like . "\\\\begin{%s}\\|\\\\\\\\") (alignat-like . "\\\\begin{%s}{[0-9]*}\\|\\\\\\\\")) "Alist with default regular expressions for finding context.\nThe form (format regexp (regexp-quote environment)) is used to calculate\nthe final regular expression - so %s will be replaced with the environment\nor macro." (repeat (cons (symbol) (regexp))) reftex-trust-label-prefix "Non-nil means, trust the label prefix when determining label type.\nIt is customary to use special label prefixes to distinguish different label\ntypes.  The label prefixes have no syntactic meaning in LaTeX (unless\nspecial packages like fancyref are being used).  RefTeX can and by\ndefault does parse around each label to detect the correct label type,\nbut this process can be slow when a document contains thousands of\nlabels.  If you use label prefixes consistently, you may speed up\ndocument parsing by setting this variable to a non-nil value.  RefTeX\nwill then compare the label prefix with the prefixes found in\n`reftex-label-alist' and derive the correct label type in this way.\nPossible values for this option are:\n\nt          This means to trust any label prefixes found.\nregexp     If a regexp, only prefixes matched by the regexp are trusted.\nlist       List of accepted prefixes, as strings.  The colon is part of\n           the prefix, e.g. (\"fn:\" \"eqn:\" \"item:\").\nnil        Never trust a label prefix.\n\nThe only disadvantage of using this feature is that the label context\ndisplayed in the label selection buffer along with each label is\nsimply some text after the label definition.  This is no problem if you\nplace labels keeping this in mind (e.g. *before* the equation, *at\nthe beginning* of a fig/tab caption ...).  Anyway, it is probably best\nto use the regexp or the list value types to fine-tune this feature.\nFor example, if your document contains thousands of footnotes with\nlabels fn:xxx, you may want to set this variable to the value \"^fn:$\" or\n(\"fn:\").  Then RefTeX will still do extensive parsing for any\nnon-footnote labels." (choice (const :tag "Always" t) (const :tag "Never" nil) (regexp) (repeat :tag "List" (string :tag "prefix (with colon)"))) reftex-special-environment-functions "List of functions to be called when trying to figure out current environment.\nThese are special functions to detect \"environments\" which do not\nstart with \\begin and end with \\end.  Some LaTeX packages seem to\nuse such non-standard ways to set up environment-like constructs.  The\npurpose of each function in this list is to detect if point is\ncurrently inside such a special \"environment\".  If the environment\ncarries a label, you must also set up an entry for it in\n`reftex-label-alist'.\n\nThe function should check if point is currently in the special\nenvironment it was written to detect.  If so, the function must return\na cons cell (NAME . POSITION).  NAME is the name of the environment\ndetected and POSITION is the buffer position where the environment\nstarts.  The function must return nil on failure to detect the\nenvironment.\n\nThe function must take an argument BOUND.  If non-nil, BOUND is a\nboundary for backwards searches which should be observed.\n\nHere is an example.  The LaTeX package linguex.sty defines list macros\n`\\ex.', `\\a.', etc for lists which are terminated by `\\z.' or an empty\nline.\n\n    \\ex.  \\label{ex:12} Some text in an exotic language ...\n          \\a. \\label{ex:13} more stuff\n          \\b. \\label{ex:14} still more stuff\n\n    ... more text after the empty line terminating all lists\n\nAnd here is the setup for RefTeX:\n\n1. Define a dummy environment for this in `reftex-label-alist'.  Dummy means,\n   make up an environment name even though it is not used with \\begin and\n   \\end.  Here we use \"linguex\" as this name.\n\n   (setq reftex-label-alist\n         '((\"linguex\" ?x \"ex:\" \"~\\\\ref{%s}\" nil (\"Example\" \"Ex.\"))))\n\n2. Write a function to detect the list macros and the determinators as well.\n\n   (defun my-detect-linguex-list (bound)\n     (let ((pos (point)) p1)\n       (save-excursion\n         ;; Search for any of the linguex item macros at the beginning of a line\n         (if (re-search-backward\n              \"^[ \\t]*\\\\(\\\\\\\\\\\\(ex\\\\|a\\\\|b\\\\|c\\\\|d\\\\|e\\\\|f\\\\)g?\\\\.\\\\)\" bound t)\n             (progn\n               (setq p1 (match-beginning 1))\n               ;; Make sure no empty line or \\z. is between us and the item macro\n               (if (re-search-forward \"\\n[ \\t]*\\n\\\\|\\\\\\\\z\\\\.\" pos t)\n                   ;; Return nil because list was already closed\n                   nil\n                 ;; OK, we got it\n                 (cons \"linguex\" p1)))\n           ;; Return nil for not found\n           nil))))\n\n3. Tell RefTeX to use this function\n\n   (setq reftex-special-environment-functions '(my-detect-linguex-list))" reftex-making-and-inserting-labels "Options on how to create new labels." reftex-insert-label-flags '("s" "sft") "Flags governing label insertion.  First flag DERIVE, second flag PROMPT.\n\nIf DERIVE is t, RefTeX will try to derive a sensible label from context.\nA section label for example will be derived from the section heading.\nThe conversion of the context to a valid label is governed by the\nspecifications given in `reftex-derive-label-parameters'.\nIf RefTeX fails to derive a label, it will prompt the user.\nIf DERIVE is nil, the label generated will consist of the prefix and a\nunique number, like `eq:23'.\n\nIf PROMPT is t, the user will be prompted for a label string.  The prompt will\nalready contain the prefix, and (if DERIVE is t) a default label derived from\ncontext.  When PROMPT is nil, the default label will be inserted without\nquery.\n\nSo the combination of DERIVE and PROMPT controls label insertion.  Here is a\ntable describing all four possibilities:\n\nDERIVE   PROMPT      ACTION\n-------------------------------------------------------------------------\n nil     nil     Insert simple label, like eq:22 or sec:13.  No query.\n nil     t       Prompt for label.\n t       nil     Derive a label from context and insert without query.\n t       t       Derive a label from context and prompt for confirmation.\n\nEach flag may be set to t, nil, or a string of label type letters\nindicating the label types for which it should be true.  The strings work\nlike character classes.\nThus, the combination may be set differently for each label type.  The\ndefault settings \"s\" and \"sft\" mean: Derive section labels from headings\n(with confirmation).  Prompt for figure and table labels.  Use simple labels\nwithout confirmation for everything else.\nThe available label types are: s (section), f (figure), t (table), i (item),\ne (equation), n (footnote), N (endnote), plus any definitions in\n`reftex-label-alist'." (list (choice :tag "Derive label from context" (const :tag "always" t) (const :tag "never" nil) (string :tag "selected label types" #1#)) (choice :tag "Prompt for label string  " :entry-format "  %b %v" (const :tag "always" t) (const :tag "never" nil) (string :tag "selected label types" #1#))) reftex-string-to-label-function 'reftex-string-to-label "Function to turn an arbitrary string into a valid label.\nRefTeX's default function uses the variable `reftex-derive-label-parameters'." symbol reftex-translate-to-ascii-function 'reftex-latin1-to-ascii "Filter function to convert a string to ASCII.\nThe function is used to process a context string before it is\nused to derive a label from it.  The intended application is to\nconvert ISO or Mule characters into something valid in labels.\nThe default function removes the accents from Latin-1 characters.\nX-Symbol (>=2.6) sets this variable to the much more general\n`x-symbol-translate-to-ascii'." reftex-derive-label-parameters '(3 20 t 1 "-" ("the" "on" "in" "off" "a" "for" "by" "of" "and" "is" "to") t) "Parameters for converting a string into a label.\nThis variable is a list of the following items.\n\nNWORDS      Number of words to use.\nMAXCHAR     Maximum number of characters in a label string.\nINVALID     nil: Throw away any words containing characters invalid in labels.\n            t:   Throw away only the invalid characters, not the whole word.\nABBREV      nil: Never abbreviate words.\n            t:   Always abbreviate words (see `reftex-abbrev-parameters').\n            not t and not nil: Abbreviate words if necessary to shorten\n                               label string below MAXCHAR.\nSEPARATOR   String separating different words in the label.\nIGNOREWORDS List of words which should not be part of labels.\nDOWNCASE    t:   Downcase words before using them." (list (integer :tag "Number of words            " 3) (integer :tag "Maximum label length       " 20) (choice :tag "Invalid characters in words" (const :tag "throw away entire word" nil) (const :tag "throw away single chars" t)) (choice :tag "Abbreviate words           " (const :tag "never" nil) (const :tag "always" t) (const :tag "when label is too long" 1)) (string :tag "Separator between words    " "-") (repeat :tag "Ignore words" :entry-format "           %i %d %v" (string :tag #1#)) (option (boolean :tag "Downcase words          "))) reftex-label-illegal-re "[^-a-zA-Z0-9_+=:;,.]" "Regexp matching characters not valid in labels." (regexp :tag "Regular Expression") reftex-abbrev-parameters '(4 2 "^aeiou" "aeiou") "Parameters for abbreviation of words.\nThis variable is a list of the following items.\n\nMIN-CHARS    Minimum number of characters remaining after abbreviation.\nMIN-KILL     Minimum number of characters to remove when abbreviating words.\nBEFORE       Character class before abbrev point in word.\nAFTER        Character class after  abbrev point in word." (list (integer :tag "Minimum chars per word" 4) (integer :tag "Shorten by at least   " 2) (string :tag "cut before char class " "^saeiou") (string :tag "cut after  char class " "aeiou")) reftex-format-label-function "Function which produces the string to insert as a label definition.\nNormally should be nil, unless you want to do something fancy.\nThe function will be called with two arguments, the LABEL and the DEFAULT\nFORMAT, which usually is `\\label{%s}'.  The function should return the\nstring to insert into the buffer." function "Options on how to reference labels."] 24)
(defconst reftex-tmp '((const :tag "on" t) (const :tag "off" nil) (string :tag "Selected label types")))
(byte-code "\304\305\306\307\310\311\312\313\314\315\316BBB\314\315\317BBB\314\315\320BBB\314\315\321BBB\314\315\322BBB\314\315\323BBB\314\315\324BBB\314\315\325BBB\257	&\210\304\326\327\330\310\311\312\331&\210\304\301\332\333\310\311\334\335\312\336&	\210\304\337\340\341\310\311\334\335\312\342&	\210\304\302\343\344\310\311\312\314\315\345BBB&\210\304\303\343\346\310\311\312\314\315\347BBB&\210\304\350\351\352\310\311\334\335\312\353\354\355	\"B&	\210\n\203\247\356\350\357\"\210\203\260\356\350\360\"\210\304\361\362\363\310\311\312\364&\210\304\365\340\366\310\311\312\342&\210\304\367\343\370\310\311\312\371&\210\304\372\343\373\310\311\312\374&\210\375\376\343\377\310\201@%\210\304\201A\201B\201C\310\376\312\201D&\207" [reftex-tmp reftex-ref-style-alist reftex-vref-is-default reftex-fref-is-default custom-declare-variable reftex-label-menu-flags '(t t nil nil nil nil t nil) "List of flags governing the label menu makeup.\nThe flags are:\n\nTABLE-OF-CONTENTS  Show the labels embedded in a table of context.\nSECTION-NUMBERS    Include section numbers (like 4.1.3) in table of contents.\nCOUNTERS           Show counters.  This just numbers the labels in the menu.\nNO-CONTEXT         Non-nil means do NOT show the short context.\nFOLLOW             Follow full context in other window.\nSHOW-COMMENTED     Show labels from regions which are commented out.\nMATCH-IN-TOC       Obsolete flag.\nSHOW FILES         Show begin and end of included files.\n\nEach of these flags can be set to t or nil, or to a string of type letters\nindicating the label types for which it should be true.  These strings work\nlike character classes in regular expressions.  Thus, setting one of the\nflags to \"sf\" makes the flag true for section and figure labels, nil\nfor everything else.  Setting it to \"^sf\" makes it the other way round.\nThe available label types are: s (section), f (figure), t (table), i (item),\ne (equation), n (footnote), plus any definitions in `reftex-label-alist'.\n\nMost options can also be switched from the label menu itself - so if you\ndecide here to not have a table of contents in the label menu, you can still\nget one interactively during selection from the label menu." :group reftex-referencing-labels :type list choice :tag "Embed in table of contents      " "Show section numbers            " "Show individual counters        " "Hide short context              " "Follow context in other window  " "Show commented labels           " "Obsolete flag,  Don't use.      " "Show begin/end of included files" reftex-multiref-punctuation '((44 . ", ") (45 . "--") (43 . " and ")) "Punctuation strings for multiple references.\nWhen marking is used in the selection buffer to select several references,\nthis variable associates the 3 marking characters `,-+' with prefix strings\nto be inserted into the buffer before the corresponding \\ref macro.\nThis is used to string together whole reference sets, like\n`eqs. 1,2,3-5,6 and 7' in a single call to `reftex-reference'. See manual." (repeat (cons (character) (string))) '(("Default" t (("\\ref" 13) ("\\pageref" 112))) ("Varioref" "varioref" (("\\vref" 118) ("\\vpageref" 103) ("\\Vref" 86) ("\\Ref" 82))) ("Fancyref" "fancyref" (("\\fref" 102) ("\\Fref" 70))) ("Hyperref" "hyperref" (("\\autoref" 97) ("\\autopageref" 117)))) "Alist of reference styles.\nEach element is a list of the style name, the name of the LaTeX\npackage associated with the style or t for any package, and an\nalist of macros where the first entry of each item is the\nreference macro and the second a key for selecting the macro when\nthe macro type is being prompted for.  (See also\n`reftex-ref-macro-prompt'.)  The keys, represented as characters,\nhave to be unique." :version "24.3" (alist :key-type (string :tag "Style name") :value-type (group (choice :tag "Package" (const :tag "Any package" t) (string :tag "Name")) (repeat :tag "Macros" (group (string :tag "Macro") (character :tag "Key"))))) reftex-ref-macro-prompt t "If non-nil, `reftex-reference' prompts for the reference macro." boolean nil "Non-nil means, the varioref reference style is used as default.\nThe value of this variable determines the default which is active\nwhen entering the selection process.  Instead of nil or t, this\nmay also be a string of type letters indicating the label types\nfor which it should be true.\n\nThis variable is obsolete, use `reftex-ref-style-default-list'\ninstead." "\\vref is default macro" "Non-nil means, the fancyref reference style is used as default.\nThe value of this variable determines the default which is active\nwhen entering the selection process.  Instead of nil or t, this\nmay also be a string of type letters indicating the label types\nfor which it should be true.\n\nThis variable is obsolete, use `reftex-ref-style-default-list'\ninstead." "\\fref is default macro" reftex-ref-style-default-list '("Default") "List of reference styles to be activated by default.\nThe order is significant and controls the order in which macros\ncan be cycled in the buffer for selecting a label.  The entries\nin the list have to match the respective reference style names\nused in the variable `reftex-ref-style-alist'." set mapcar #[(x) "\301@D\207" [x const] 2] add-to-list "Varioref" "Fancyref" reftex-level-indent 2 "Number of spaces to be used for indentation per section level." integer reftex-guess-label-type "Non-nil means, `reftex-reference' will try to guess the label type.\nTo do that, RefTeX will look at the word before the cursor and compare it with\nthe words given in `reftex-label-alist'.  When it finds a match, RefTeX will\nimmediately offer the correct label menu - otherwise it will prompt you for\na label type.  If you set this variable to nil, RefTeX will always prompt." reftex-format-ref-function "Function which produces the string to insert as a reference.\nNormally should be nil, because the format to insert a reference\ncan already be specified in `reftex-label-alist'.\n\nThis hook also is used by the special commands to insert\ne.g. `\\vref' and `\\fref' references, so even if you set this,\nyour setting will be ignored by the special commands.\n\nThe function will be called with three arguments, the LABEL, the\nDEFAULT FORMAT, which normally is `~\\ref{%s}' and the REFERENCE\nSTYLE.  The function should return the string to insert into the\nbuffer." (choice (const nil) function) reftex-select-label-mode-hook "Mode hook for `reftex-select-label-mode'." hook custom-declare-group reftex-citation-support "Support for referencing bibliographic data with BibTeX." reftex reftex-bibliography-commands '("bibliography" "nobibliography" "setupbibtex\\[.*?database=") "LaTeX commands which specify the BibTeX databases to use with the document." (repeat string)] 19)
(defvar reftex-bibfile-ignore-list nil)
(byte-code "\302\303\304\305\306\307\310\311\312\313&	\210\302\314\304\315\306\307\312\316&\210\302\317\320\321\306\307\312\322&\210\302\323\324\325\306\307\312\326\327\330\331\332\333\334\335\336\337\340\341\"BBBBBBB\342BBBB&\210\302\343\344\345\306\307\312\346&\210\302\347\350\351\306\307\312\352&\210\302\353\304\354\306\307\312\352&\210\302\355\356\357\306\307\312\360&\210\302\361\362\363\306\307\306\364\312\360&	\210\302\365\366\367\306\307\312\370&\210\302\371\304\372\306\307\312\373&\210\302\374\304\375\306\307\312\376&\210\302\377\201@\201A\306\307\201B\201C\312\360&	\210\302\201D\304\201E\306\307\201B\201C\312\201F&	\210\302\201G\304\201H\306\307\201B\201C\312\201I&	\210\201J\201K\304\201L\306\201M%\210\302\201N\350\201O\306\201K\312\352&\210\302\201P\201Q\201R\306\201K\312\201S&\210\302\201T\304\201U\306\201K\310\311\312\201V\201W\201X\332\201Y\326\332\201Z\336\201[\340\201\\	\"BBBBBFE&	\210\302\201]\201^\201_\306\201K\312\201`&\210\302\201a\201b\201c\306\201K\312\201d&\210\302\201e\201f\201g\306\201K\312\360&\210\302\201h\201i\201j\306\201K\312\360&\210\302\201k\201l\201m\306\201K\312\201n&\210\302\201o\201p\201q\306\201K\312\201n&\210\302\201r\350\201s\306\201K\312\352&\210\302\201t\350\201u\306\201K\312\352&\210\302\201v\304\201w\306\201K\312\201x&\210\302\201y\304\201z\306\201K\312\352&\210\302\201{\304\201|\306\201K\312\352&\210\302\201}\304\201~\306\201K\312\352&\210\302\201\350\201\200\306\201K\312\352&\210\302\201\201\201\202\201\203\306\201K\312\201\204&\210\302\201\205\304\201\206\306\201K\312\352&\210\302\201\207\304\201\210\306\201\211\312\352&\210\201J\364\304\201\212\306\201M%\210\302\201\213\304\201\214\306\364\312\201\215&\210\302\201\216\350\201\217\306\364\312\201\220&\210\302\201\221\201\222\201\223\306\364\312\201\224&\210\302\201\225\304\201\226\306\364\312\352&\210\302\201\227\350\201\230\306\364\312\352&\210\302\201\231\304\201\232\306\364\306\201\233\312\376&	\210\201J\201\234\304\201\235\306\201M%\210\302\201\236\201\237\201\240\306\201\234\310\311\312\201\241&	\210\302\201\242\201\243\201\244\306\307\306\201\234\310\311\312\201\245&\210\302\201\246\201\247\201\250\306\201\234\312\201\251&\210\302\201\252\304\201\253\306\201\234\312\352&\210\302\201\254\350\201\255\306\201\234\312\352&\210\302\201\256\304\201\257\306\201\234\312\352&\210\302\201\260\201\261\201\262\306\201\234\312\201\263&\210\201J\201\264\304\201\265\306\201M%\210\302\201\266\201\267\201\270\306\201\264\312\201\271&\210\302\201\272\304\201\273\306\201\264\312\201\274&\210\302\201\275\201\276\201\277\306\201\264\312\201\300&\210\302\201\301\304\201\302\306\201\264\312\352&\210\302\201\303\350\201\304\306\201\264\312\352&\210\302\201\305\304\201\306\306\201\264\312\352&\210\302\201\307\201\310\201\311\306\201\264\312\360&\210\302\201\312\304\201\313\306\201\264\306\201\233\312\352&	\210\302\201\314\350\201\315\306\201\264\306\201\233\312\352&	\210\201J\201\316\304\201\317\201\320\201\321\306\201M&\210\302\201\322\350\201\323\306\201\316\312\352&\210\302\201\324\201\267\201\325\306\201\316\306\201\233\312\201\326&	\210\302\201\327\201\330\201\331\306\201\316\312\201\332&\210\302\201\333\201\334\201\335\306\201\316\312\201\336&\210\302\201\337\201\340\201\341\306\201\316\312\201\336&\210\302\201\342\201\343\201\344\306\201\316\312\201\336&\210\302\201\345\201\346\201\347\306\201\316\312\201\336&\210\302\201\350\201\351\201\352\306\201\316\312\201\336&\210\302\201\353\201\354\201\355\306\201\316\312\201\336&\210\302\201\356\201\357\201\360\306\201\316\312\201\336&\210\302\201\361\201\362\201\363\306\201\316\312\201\336&\210\302\201\364\201\365\201\366\306\201\316\312\201\336&\210\302\201\367\201\370\201\371\306\201\316\312\201\336&\210\302\201\372\201\373\201\374\306\201\316\312\201\336&\210\302\201\375\201\376\201\377\306\201\316\312\201\336&\210\302\201
\201

\201
\306\201\316\312\201\336&\210\302\201
\201
\201
\306\201\316\312\201\336&\210\302\201
\201
\201
\306\201\316\312\201\336&\210\302\201	
\304\201\n
\306\201\316\312\376&\210\201J\201
\304\201\f
\306\201M%\210\302\201

\304\201
\306\201
\312\352&\210\302\201
\304\201
\306\201
\306\201
\312\201
&	\210\302\201
\304\201
\306\201
\312\352&\210\302\201
\304\201
\306\201
\312\376&\210\302\201
\304\201
\306\201
\312\376&\210\201
\201
!\207" [reftex-cite-format-builtin reftex-index-macros-builtin custom-declare-variable reftex-bibfile-ignore-regexps nil "List of regular expressions to exclude files in \\bibliography{..}.\nFile names matched by these regexps will not be parsed by RefTeX.\nIntended for files which contain only `@string' macro definitions and the\nlike, which are ignored by RefTeX anyway." :group reftex-citation-support :set reftex-set-dirty :type (repeat (regexp)) reftex-default-bibliography "List of BibTeX database files which should be used if none are specified.\nWhen `reftex-citation' is called from a document which has neither a\n`\\bibliography{..}' statement nor a `thebibliography' environment,\nRefTeX will scan these files instead.  Intended for using `reftex-citation'\nin non-LaTeX files.  The files will be searched along the BIBINPUTS or TEXBIB\npath." (repeat (file)) reftex-sort-bibtex-matches 'reverse-year "Sorting of the entries found in BibTeX databases by reftex-citation.\nPossible values:\nnil            Do not sort entries.\n'author        Sort entries by author name.\n'year          Sort entries by increasing year.\n'reverse-year  Sort entries by decreasing year." (choice (const :tag "not" nil) (const :tag "by author" author) (const :tag "by year" year) (const :tag "by year, reversed" reverse-year)) reftex-cite-format 'default "The format of citations to be inserted into the buffer.\nIt can be a string or an alist or a symbol.  In the simplest case this\nis just the string \"\\cite{%l}\", which is also the default.  See the\ndefinition of `reftex-cite-format-builtin' for more complex examples.\n\nIf `reftex-cite-format' is a string, it will be used as the format.\nIn the format, the following percent escapes will be expanded.\n\n%l   The BibTeX label of the citation.\n%a   List of author names, see also `reftex-cite-punctuation'.\n%2a  Like %a, but abbreviate more than 2 authors like Jones et al.\n%A   First author name only.\n%e   Works like %a, but on list of editor names. (%2e and %E work a well)\n\nIt is also possible to access all other BibTeX database fields:\n%b booktitle     %c chapter        %d edition    %h howpublished\n%i institution   %j journal        %k key        %m month\n%n number        %o organization   %p pages      %P first page\n%r address       %s school         %u publisher  %t title\n%v volume        %y year\n%B booktitle, abbreviated          %T title, abbreviated\n\nUsually, only %l is needed.  The other stuff is mainly for the echo area\ndisplay, and for (setq reftex-comment-citations t).\n\n%< as a special operator kills punctuation and space around it after the\nstring has been formatted.\n\nA pair of square brackets indicates an optional argument, and RefTeX\nwill prompt for the values of these arguments.\n\nBeware that all this only works with BibTeX database files.  When\ncitations are made from the \\bibitems in an explicit thebibliography\nenvironment, only %l is available.\n\nIf `reftex-cite-format' is an alist of characters and strings, the user\nwill be prompted for a character to select one of the possible format\nstrings.\n  In order to configure this variable, you can either set\n`reftex-cite-format' directly yourself or set it to the SYMBOL of one of\nthe predefined styles.  The predefined symbols are those which have an\nassociation in the constant `reftex-cite-format-builtin'.\nE.g.: (setq reftex-cite-format 'natbib)" choice :format "%{%t%}: \n%[Value Menu%] %v" radio :tag "Symbolic Builtins" :indent 4 :value default mapcar #[(x) "\301\302\303@!\304A@Q@F\207" [x const :tag symbol-name ": "] 5] ((string :tag "format string" "\\cite{%l}") (repeat :tag "key-ed format strings" :value ((13 . "\\cite{%l}") (116 . "\\cite{%l}") (112 . "\\cite{%l}")) (cons (character :tag "Key character" 13) (string :tag "Format string" #1="")))) reftex-cite-prompt-optional-args 'maybe "Non-nil means, prompt for empty optional arguments in cite macros.\nWhen an entry in `reftex-cite-format' is given with square brackets to\nindicate optional arguments (for example \\cite[][]{%l}), RefTeX can\nprompt for values.  Possible values are:\n\nnil     Never prompt for optional arguments\nt       Always prompt\nmaybe   Prompt only if `reftex-citation' was called with C-u prefix arg\n\nUnnecessary empty optional arguments are removed before insertion into\nthe buffer.  See `reftex-cite-cleanup-optional-args'." (choice (const :tag "Always" t) (const :tag "When called with prefix arg" maybe) (const :tag "Never" nil)) reftex-cite-cleanup-optional-args t "Non-nil means, remove unnecessary empty optional arguments in cite macros.\nThe cite macros provided by some packages (for example\nnatbib) allow specifying two optional arguments, one for a prefix to\nthe citation, and a second for a postfix.  When only one optional\nargument is given, it is interpreted as postfix.  When this option is\nt, RefTeX removes unnecessary empty optional arguments from the cite\nmacro before insertion.  For example, it will change\n    \\cite[][]{Jones}              -> \\cite{Jones}\n    \\cite[][Chapter 1]{Jones}     -> \\cite[Chapter 1]{Jones}\n    \\cite[see][]{Jones}           -> \\cite[see][]{Jones}\n    \\cite[see][Chapter 1]{Jones}  -> \\cite{Jones}\nIs is possible that other packages have other conventions about which\noptional argument is interpreted how - that is why this cleaning up\ncan be turned off." boolean reftex-comment-citations "Non-nil means add a comment for each citation describing the full entry.\nThe comment is formatted according to `reftex-cite-comment-format'." reftex-cite-comment-format "%% %2a %y, %j %v, %P, %b, %e, %u, %s %<\n" "Citation format used for commented citations.  Must NOT contain %l.\nSee the variable `reftex-cite-format' for possible percent escapes." string reftex-cite-view-format "%2a %y, %T, %B, %j %v:%P, %s %<" "Citation format used to display citation info in the message area.\nMust NOT contain %l.  See the variable `reftex-cite-format' for\npossible percent escapes." reftex-viewing-cross-references reftex-cite-punctuation '(", " " \\& " " {\\it et al.}") "Punctuation for formatting of name lists in citations.\nThis is a list of 3 strings.\n1. Normal names separator, like \", \"     in Jones, Brown and Miller\n2. Final names separator,  like \" and \"  in Jones, Brown and Miller\n3. The \"et al\" string,   like \" {\\it et al.}\" in Jones {\\it et al.}" (list (string :tag "Separator for names            ") (string :tag "Separator for last name in list") (string :tag "string used as et al.          ")) reftex-format-cite-function "Function which produces the string to insert as a citation.\nNormally should be nil, because the format to insert a reference can\nalready be specified in `reftex-cite-format'.\nThe function will be called with two arguments, the CITATION KEY and the\nDEFAULT FORMAT, which is taken from `reftex-cite-format'.  The function\nshould return the string to insert into the buffer." (choice (const nil) function) reftex-select-bib-mode-hook "Mode hook for reftex-select-bib-mode." hook reftex-cite-key-separator "," "String to be used for separating several keys in a \\cite macro." :version "24.3" reftex-create-bibtex-header "Header to insert in BibTeX files generated by RefTeX." (choice (const :tag "No header" nil) string) reftex-create-bibtex-footer "Footer to insert in BibTeX files generated by RefTeX." (choice (const :tag "No footer" nil) string) custom-declare-group reftex-index-support "Support for viewing and editing the index." reftex reftex-support-index "Non-nil means, index entries are parsed as well.\nIndex support is resource intensive and the internal structure holding the\nparsed information can become quite big.  Therefore it can be turned off.\nWhen this is nil and you execute a command which requires index support,\nyou will be asked for confirmation to turn it on and rescan the document." reftex-index-special-chars '("!" "|" "@" "\"" "\\") "Special characters in index entries.  The value is a list of five strings.\nThese correspond to the makeindex keywords LEVEL ENCAP ACTUAL QUOTE ESCAPE." (list (string :tag "LEVEL  separator") (string :tag "ENCAP  char     ") (string :tag "ACTUAL char     ") (string :tag "QUOTE  char     ") (string :tag "ESCAPE char     ")) reftex-index-macros "Macros which define index entries.\n\nThe structure is\n\n(MACRO INDEX-TAG KEY PREFIX EXCLUDE REPEAT)\n\nMACRO is the macro.  Arguments should be denoted by empty braces like\n\\index[]{*}.  Use square brackets to denote optional arguments.  The star\nmarks where the index key is.\n\nINDEX-TAG is a short name of the index.  \"idx\" and \"glo\" are\nreserved for the default index and the glossary.  Other indices can be\ndefined as well.  If this is an integer, the Nth argument of the macro\nholds the index tag.\n\nKEY is a character which is used to identify the macro for input with\n\\[reftex-index].  ?i, ?I, and ?g are reserved for default index and glossary.\n\nPREFIX can be a prefix which is added to the KEY part of the index entry.\nIf you have a macro \\newcommand{\\molec}[1]{#1\\index{Molecules!#1}}, this\nprefix should be \"Molecules!\".  See the manual for details.\n\nEXCLUDE can be a function.  If this function exists and returns a non-nil\nvalue, the index entry at point is ignored.  This was implemented to support\nthe (deprecated) `^' and `_' shortcuts in the LaTeX2e `index' package.\n\nREPEAT, if non-nil, means the index macro does not typeset the entry in\nthe text, so that the text has to be repeated outside the index macro.\nNeeded for `reftex-index-selection-or-word' and for indexing from the\nphrase buffer.\n\nThe final entry may also be a symbol if this entry has a association\nin the variable `reftex-index-macros-builtin' to specify the main\nindexing package you are using.  Valid values are currently\ndefault         The LaTeX default - unnecessary to specify this one\nmultind         The multind.sty package\nindex           The index.sty package\nindex-shortcut  The index.sty packages with the ^ and _ shortcuts.\n                Should not be used - only for old documents.\nNote that AUCTeX sets these things internally for RefTeX as well, so\nwith a sufficiently new version of AUCTeX, you should not set the\npackage here." list (repeat :inline t (list :value (#1# "idx" 97 #1# nil) (string :tag "Macro with args") (choice :tag "Index Tag      " (string) (integer :tag "Macro arg Nr" :value 1)) (character :tag "Access Key     ") (string :tag "Key Prefix     ") (symbol :tag "Exclusion hook ") (boolean :tag "Repeat Outside "))) option "Package:" "Package" index #[(x) "\301\302\303@!\304A@Q@F\207" [x const :tag symbol-name ": "] 5] reftex-index-default-macro '(105 "idx") "The default index macro for \\[reftex-index-selection-or-word].\nThis is a list with (MACRO-KEY DEFAULT-TAG).\n\nMACRO-KEY:   Character identifying an index macro - see `reftex-index-macros'.\nDEFAULT-TAG: This is the tag to be used if the macro requires a TAG argument.\n             When this is nil and a TAG is needed, RefTeX will ask for it.\n             When this is the empty string and the TAG argument of the index\n             macro is optional, the TAG argument will be omitted." (list (character :tag "Character identifying default macro") (choice :tag "Default index tag                  " (const nil) (string))) reftex-index-default-tag "idx" "Default index tag.\nWhen working with multiple indexes, RefTeX queries for an index tag when\ncreating index entries or displaying a specific index.  This variable controls\nthe default offered for these queries.  The default can be selected with RET\nduring selection or completion.  Valid values of this variable are:\n\nnil       Do not provide a default index\n\"tag\"     The default index tag given as a string, e.g. \"idx\".\nlast      The last used index tag will be offered as default." (choice (const :tag "no default" nil) (const :tag "last used " 'last) (string :tag "index tag " "idx")) reftex-index-math-format "$%s$" "Format of index entries when copied from inside math mode.\nWhen `reftex-index-selection-or-word' is executed inside TeX math mode,\nthe index key copied from the buffer is processed with this format string\nthrough the `format' function.  This can be used to add the math delimiters\n(e.g. `$') to the string.\nRequires the `texmathp.el' library which is part of AUCTeX." reftex-index-phrase-file-extension ".rip" "File extension for the index phrase file.\nThis extension will be added to the base name of the master file." reftex-index-phrases-logical-and-regexp " *&& *" "Regexp matching the `and' operator for index arguments in phrases file.\nWhen several index arguments in a phrase line are separated by this\noperator, each part will generate an index macro.  So each match of\nthe search phrase will produce *several* different index entries.\n\nNote: make sure this does no match things which are not separators.\nThis logical `and' has higher priority than the logical `or' specified in\n`reftex-index-phrases-logical-or-regexp'." regexp reftex-index-phrases-logical-or-regexp " *|| *" "Regexp matching the `or' operator for index arguments in phrases file.\nWhen several index arguments in a phrase line are separated by this\noperator, the user will be asked to select one of them at each match\nof the search phrase.  The first index arg will be the default - a\nnumber key 1-9 must be pressed to switch to another.\n\nNote: make sure this does no match things which are not separators.\nThe logical `and' specified in `reftex-index-phrases-logical-or-regexp'\nhas higher priority than this logical `or'." reftex-index-phrases-search-whole-words "Non-nil means phrases search will look for whole words, not subwords.\nThis works by requiring word boundaries at the beginning and end of\nthe search string.  When the search phrase already has a non-word-char\nat one of these points, no word boundary is required there." reftex-index-phrases-case-fold-search "Non-nil means, searching for index phrases will ignore case." reftex-index-verify-function "A function which is called  at each match during global indexing.\nIf the function returns nil, the current match is skipped." (choice (const :tag "No verification" nil) (function)) reftex-index-phrases-skip-indexed-matches "Non-nil means, skip matches which appear to be indexed already.\nWhen doing global indexing from the phrases buffer, searches for some\nphrases may match at places where that phrase was already indexed.  In\nparticular when indexing an already processed document again, this\nwill even be the norm.  When this variable is non-nil, RefTeX checks if\nthe match is inside an index macro argument, or if an index macro is directly\nbefore or after the phrase.  If that is the case, that match will\nbe ignored." reftex-index-phrases-wrap-long-lines "Non-nil means, when indexing from the phrases buffer, wrap lines.\nInserting indexing commands in a line makes the line longer - often\nso long that it does not fit onto the screen.  When this variable is\nnon-nil, newlines will be added as necessary before and/or after the\nindexing command to keep lines short.  However, the matched text\nphrase and its index command will always end up on a single line." reftex-index-phrases-sort-prefers-entry "Non-nil means when sorting phrase lines, the explicit index entry is used.\nPhrase lines in the phrases buffer contain a search phrase, and\nsorting is normally based on these.  Some phrase lines also have\nan explicit index argument specified.  When this variable is non-nil,\nthe index argument will be used for sorting." reftex-index-phrases-sort-in-blocks "Non-nil means, empty and comment lines separate phrase buffer into blocks.\nSorting will then preserve blocks, so that lines are re-arranged only\nwithin blocks." reftex-index-section-letters "ABCDEFGHIJKLMNOPQRSTUVWXYZ" "The letters which denote sections in the index.\nUsually these are all capital letters.  Don't use any downcase letters.\nOrder is not significant, the index will be sorted by whatever the sort\nfunction thinks is correct.\nIn addition to these letters, RefTeX will create a group `!' which\ncontains all entries sorted below the lowest specified letter.\nIn the index buffer, pressing any of these capital letters or `!' will jump\nto that section." (string :tag "Capital letters") reftex-index-include-context "Non-nil means, display the index definition context in the index buffer.\nThis flag may also be toggled from the index buffer with the `c' key." reftex-index-follow-mode "Non-nil means, point in *Index* buffer will cause other window to follow.\nThe other window will show the corresponding part of the document.\nThis flag can be toggled from within the *Index* buffer with the `f' key." reftex-table-of-contents-browser "Displaying cross references and citations." reftex-view-crossref-extra "Macros which can be used for the display of cross references.\nThis is used when `reftex-view-crossref' is called with point in an\nargument of a macro.  Note that crossref viewing for citations,\nreferences (both ways) and index entries is hard-coded.  This variable\nis only to configure additional structures for which cross-reference\nviewing can be useful.  Each entry has the structure\n\n(MACRO-RE SEARCH-RE HIGHLIGHT).\n\nMACRO-RE is matched against the macro.  SEARCH-RE is the regexp used\nto search for cross references.  `%s' in this regexp is replaced with\nwith the macro argument at point.  HIGHLIGHT is an integer indicating\nwhich subgroup of the match should be highlighted." (repeat (group (regexp :tag "Macro  Regexp  ") (string :tag "Search Regexp  ") (integer :tag "Highlight Group"))) reftex-auto-view-crossref "Non-nil means, initially turn automatic viewing of crossref info on.\nAutomatic viewing of crossref info normally uses the echo area.\nWhenever point is idle for more than `reftex-idle-time' seconds on the\nargument of a \\ref or \\cite macro, and no other message is being\ndisplayed, the echo area will display information about that cross\nreference.  You can also set the variable to the symbol `window'.  In\nthis case a small temporary window is used for the display.\nThis feature can be turned on and off from the menu\n(Ref->Options)." (choice (const :tag "off" nil) (const :tag "in Echo Area" t) (const :tag "in Other Window" window)) reftex-idle-time 1.2 "Time (secs) Emacs has to be idle before automatic crossref display is done.\nApplies also to toc recentering." number reftex-revisit-to-echo "Non-nil means, automatic citation display will revisit files if necessary.\nWhen nil, citation display in echo area will only be active for cached\nentries and for BibTeX database files with live associated buffers." reftex-cache-cite-echo "Non-nil means, echoed information for cite macros is cached.\nThe information displayed in the echo area for cite macros is\ncached and even saved along with the parsing information.  The\ncache survives document scans.  In order to clear it, use M-x\nreftex-reset-mode <RET>." reftex-display-copied-context-hook "Normal hook which is run before context is displayed anywhere.\nDesigned for X-Symbol, but may have other uses as well." reftex-referencing-labels reftex-finding-files "Finding files on search paths." reftex-texpath-environment-variables '("TEXINPUTS") "List of specifications how to retrieve the search path for TeX files.\nSeveral entries are possible.\n- If an element is the name of an environment variable, its content is used.\n- If an element starts with an exclamation mark, it is used as a command\n  to retrieve the path.  A typical command with the kpathsearch library would\n  be `!kpsewhich -show-path=.tex'.\n- Otherwise the element itself is interpreted as a path.\nMultiple directories can be separated by the system dependent `path-separator'.\nDirectories ending in `//' or `!!' will be expanded recursively.\nSee also `reftex-use-external-file-finders'." (repeat (string :tag "Specification")) reftex-bibpath-environment-variables '("BIBINPUTS" "TEXBIB") "List of specifications how to retrieve search path for .bib database files.\nSeveral entries are possible.\n- If an element is the name of an environment variable, its content is used.\n- If an element starts with an exclamation mark, it is used as a command\n  to retrieve the path.  A typical command with the kpathsearch library would\n  be `!kpsewhich -show-path=.bib'.\n- Otherwise the element itself is interpreted as a path.\nMultiple directories can be separated by the system dependent `path-separator'.\nDirectories ending in `//' or `!!' will be expanded recursively.\nSee also `reftex-use-external-file-finders'." (repeat (string :tag "Specification")) reftex-file-extensions '(("tex" ".tex" ".ltx") ("bib" ".bib")) "Association list with file extensions for different file types.\nThis is a list of items, each item is like: (TYPE . (DEF-EXT OTHER-EXT ...))\n\nTYPE:       File type like \"bib\" or \"tex\".\nDEF-EXT:    The default extension for that file type, like \".tex\" or \".bib\".\nOTHER-EXT:  Any number of other valid extensions for this file type.\n\nWhen a files is searched and it does not have any of the legal extensions,\nwe try the default extension first, and then the naked file name.\n\nIf you are using AUCTeX, you also need to add new extensions to\nTeX-file-extensions." (repeat (cons (string :tag "File type") (repeat (string :tag "Extension")))) reftex-try-all-extensions "Non-nil means, try all extensions listed in `reftex-file-extensions'.\nWhen searching for a file, LaTeX uses only the default extension.  However,\nif you are working with a noweb system that produces the .tex files from\nsome other file, and you want RefTeX to scan the web file instead of the\ntex file, you need to set this option.  You also need to make the noweb\nextension the default extension, i.e. the first in the list in\n`reftex-file-extensions'.\nNote that if you are using external file finders, this option has no effect." reftex-search-unrecursed-path-first "Non-nil means, search all specified directories before trying recursion.\nThus, in a path \".//:/tex/\", search first \"./\", then \"/tex/\" and then\nall subdirectories of \"./\".  If this option is nil, the subdirectories of\n\"./\" are searched before \"/tex/\".  This is mainly for speed - most of the\ntime the recursive path is for the system files and not for the user files.\nSet this to nil if the default makes RefTeX finding files with equal names\nin wrong sequence." reftex-use-external-file-finders "Non-nil means, use external programs to find files.\nNormally, RefTeX searches the paths given in the environment variables\nTEXINPUTS and BIBINPUTS to find TeX files and BibTeX database files.\nWith this option turned on, it calls an external program specified in the\noption `reftex-external-file-finders' instead.  As a side effect,\nthe variables `reftex-texpath-environment-variables' and\n`reftex-bibpath-environment-variables' will be ignored." reftex-external-file-finders '(("tex" . "kpsewhich -format=.tex %f") ("bib" . "kpsewhich -format=.bib %f")) "Association list with external programs to call for finding files.\nEach entry is a cons cell (TYPE . PROGRAM).\nTYPE is either \"tex\" or \"bib\".  PROGRAM is the external program to use with\nany arguments.  %f will be replaced by the name of the file to be found.\nNote that these commands will be executed directly, not via a shell.\nOnly relevant when `reftex-use-external-file-finders' is non-nil." (repeat (cons (string :tag "File type") (string :tag "Program  "))) reftex-optimizations-for-large-documents "Configuration of parser speed and memory usage." reftex-keep-temporary-buffers 1 "Non-nil means, keep buffers created for parsing and lookup.\nRefTeX sometimes needs to visit files related to the current document.\nWe distinguish files visited for\nPARSING: Parts of a multifile document loaded when (re)-parsing the document.\nLOOKUP:  BibTeX database files and TeX files loaded to find a reference,\n         to display label context, etc.\nThe created buffers can be kept for later use, or be thrown away immediately\nafter use, depending on the value of this variable:\n\nnil  Throw away as much as possible.\nt    Keep everything.\n1    Throw away buffers created for parsing, but keep the ones created\n     for lookup.\n\nIf a buffer is to be kept, the file is visited normally (which is potentially\nslow but will happen only once).\nIf a buffer is to be thrown away, the initialization of the buffer depends\nupon the variable `reftex-initialize-temporary-buffers'." (choice (const :tag "Throw away everything" nil) (const :tag "Keep everything" t) (const :tag "Keep lookup buffers only" 1)) reftex-initialize-temporary-buffers "Non-nil means do initializations even when visiting file temporarily.\nWhen nil, RefTeX may turn off find-file hooks and other stuff to briefly\nvisit a file.\nWhen t, the full default initializations are done (find-file-hook etc.).\nInstead of t or nil, this variable may also be a list of hook functions to\ndo a minimal initialization." (choice (const :tag "Read files literally" nil) (const :tag "Fully initialize buffers" t) (repeat :tag "Hook functions" :value (nil) (function-item))) reftex-no-include-regexps '("\\.pstex_t\\'") "List of regular expressions to exclude certain input files from parsing.\nIf the name of a file included via \\include or \\input is matched by any\nof the regular expressions in this list, that file is not parsed by RefTeX." (repeat (regexp)) reftex-enable-partial-scans "Non-nil means, re-parse only 1 file when asked to re-parse.\nRe-parsing is normally requested with a `C-u' prefix to many RefTeX commands,\nor with the `r' key in menus.  When this option is t in a multifile document,\nwe will only parse the current buffer, or the file associated with the label\nor section heading near point in a menu.  Requesting re-parsing of an entire\nmultifile document then requires a `C-u C-u' prefix or the capital `R' key\nin menus." reftex-allow-automatic-rescan "Non-nil means, RefTeX may rescan the document when this seems necessary.\nCurrently this applies only to rescanning after label insertion, when\nthe new label cannot be inserted correctly into the internal label\nlist." reftex-save-parse-info "Non-nil means, save information gathered with parsing in a file.\nThe file MASTER.rel in the same directory as MASTER.tex is used to save the\ninformation.  When this variable is t,\n- accessing the parsing information for the first time in an editing session\n  will read that file (if available) instead of parsing the document.\n- exiting Emacs or killing a buffer in `reftex-mode' will cause a new version\n  of the file to be written." reftex-parse-file-extension ".rel" "File extension for the file in which parser information is stored.\nThis extension is added to the base name of the master file." reftex-use-multiple-selection-buffers "Non-nil means use a separate selection buffer for each label type.\nThese buffers are kept from one selection to the next and need not to be\ncreated for each use - so the menu generally comes up faster.  The\nselection buffers will be erased (and therefore updated) automatically\nwhen new labels in its category are added.  See the variable\n`reftex-auto-update-selection-buffers'." reftex-auto-update-selection-buffers "Non-nil means, selection buffers will be updated automatically.\nWhen a new label is defined with `reftex-label', all selection buffers\nassociated with that label category are emptied, in order to force an\nupdate upon next use.  When nil, the buffers are left alone and have to be\nupdated by hand, with the `g' key from the label selection process.\nThe value of this variable will only have any effect when\n`reftex-use-multiple-selection-buffers' is non-nil." reftex-fontification-configurations "Options concerning the faces used in RefTeX." :link (custom-group-link :tag "Font Lock Faces group" font-lock-faces) reftex-use-fonts "Non-nil means, use fonts in *toc* and selection buffers.\nFont-lock must be loaded as well to actually get fontified display.\nWhen changing this option, a rescan may be necessary to activate the change." reftex-refontify-context "Non-nil means, re-fontify the context in the label menu with font-lock.\nThis slightly slows down the creation of the label menu.  It is only necessary\nwhen you definitely want the context fontified.\n\nThis option may have 3 different values:\nnil  Never refontify.\nt    Always refontify.\n1    Refontify when absolutely necessary, e.g. when old versions of X-Symbol.\nThe option is ignored when `reftex-use-fonts' is nil." (choice (const :tag "Never" nil) (const :tag "Always" t) (const :tag "When necessary" 1)) reftex-highlight-selection 'cursor "Non-nil mean, highlight selected text in selection and *toc* buffers.\nNormally, the text near the cursor is the selected text, and it is\nhighlighted.  This is the entry most keys in the selection and *toc*\nbuffers act on.  However, if you mainly use the mouse to select an\nitem, you may find it nice to have mouse-triggered highlighting\ninstead or as well.  The variable may have one of these values:\n\n   nil      No highlighting.\n   cursor   Highlighting is cursor driven.\n   mouse    Highlighting is mouse driven.\n   both     Both cursor and mouse trigger highlighting.\n\nChanging this variable requires to rebuild the selection and *toc* buffers\nto become effective (keys `g' or `r')." (choice (const :tag "Never" nil) (const :tag "Cursor driven" cursor) (const :tag "Mouse driven" mouse) (const :tag "Mouse and Cursor driven." both)) reftex-cursor-selected-face 'highlight "Face name to highlight cursor selected item in toc and selection buffers.\nSee also the variable `reftex-highlight-selection'." symbol reftex-mouse-selected-face 'secondary-selection "Face name to highlight mouse selected item in toc and selection buffers.\nSee also the variable `reftex-highlight-selection'." reftex-file-boundary-face 'font-lock-comment-face "Face name for file boundaries in selection buffer." reftex-label-face 'font-lock-constant-face "Face name for labels in selection buffer." reftex-section-heading-face 'font-lock-function-name-face "Face name for section headings in toc and selection buffers." reftex-toc-header-face 'font-lock-comment-face "Face name for the header of a toc buffer." reftex-bib-author-face 'font-lock-keyword-face "Face name for author names in bib selection buffer." reftex-bib-year-face 'font-lock-comment-face "Face name for year in bib selection buffer." reftex-bib-title-face 'font-lock-function-name-face "Face name for article title in bib selection buffer." reftex-bib-extra-face 'font-lock-comment-face "Face name for bibliographic information in bib selection buffer." reftex-select-mark-face 'bold "Face name for marked entries in the selection buffers." reftex-index-header-face 'font-lock-comment-face "Face name for the header of an index buffer." reftex-index-section-face 'font-lock-function-name-face "Face name for the start of a new letter section in the index." reftex-index-tag-face 'font-lock-keyword-face "Face name for index names (for multiple indices)." reftex-index-face 'font-lock-constant-face "Face name for index entries." reftex-pre-refontification-functions "X-Symbol specific hook.\nFunctions get two arguments, the buffer from where the command started and a\nsymbol indicating in what context the hook is called." reftex-miscellaneous-configurations "Collection of further configurations." reftex-extra-bindings "Non-nil means, make additional key bindings on startup.\nThese extra bindings are located in the users `C-c letter' map." reftex-plug-into-AUCTeX "Plug-in flags for AUCTeX interface.\nThis variable is a list of 5 boolean flags.  When a flag is non-nil,\nRefTeX will\n\n  - supply labels in new sections and environments  (flag 1)\n  - supply arguments for macros like `\\label'.      (flag 2)\n  - supply arguments for macros like `\\ref'.        (flag 3)\n  - supply arguments for macros like `\\cite'.       (flag 4)\n  - supply arguments for macros like `\\index'.      (flag 5)\n\nYou may also set the variable itself to t or nil in order to turn all\nplug-ins on or off, respectively.\n\\<LaTeX-mode-map>Supplying labels in new sections and environments applies when creating\nsections with \\[LaTeX-section] and environments with \\[LaTeX-environment].\nSupplying macro arguments applies when you insert such a macro interactively\nwith \\[TeX-insert-macro].\nSee the AUCTeX documentation for more information.\nRefTeX uses `fset' to take over the function calls.  Changing the variable\nmay require a restart of Emacs in order to become effective." LaTeX (choice (const :tag "No plug-ins" nil) (const :tag "All possible plug-ins" t) (list :tag "Individual choice" :value (t t t t t) (boolean :tag "supply label in new sections and environments") (boolean :tag "supply argument for macros like `\\label'     ") (boolean :tag "supply argument for macros like `\\ref'       ") (boolean :tag "supply argument for macros like `\\cite'      ") (boolean :tag "supply argument for macros like `\\index'     "))) reftex-allow-detached-macro-args "Non-nil means, allow arguments of macros to be detached by whitespace.\nWhen this is t, `aaa' will be considered as argument of \\bb in the following\nconstruct:  \\bbb [xxx] {aaa}." reftex-load-hook "Hook which is being run when loading reftex.el." reftex-mode-hook "Hook which is being run when turning on RefTeX mode." provide reftex-vars] 22)